Home > Articles > OSHA Extends Crane Operator Certification Deadline to 2018

OSHA Extends Crane Operator Certification Deadline to 2018

///
Comments are Off

November 9, 2017

 

OSHA published a Final Rule delaying its deadline for crane operators to be certified by one year until November 10, 2018. OSHA is also extending its employer duty to ensure that crane operators are competent to operate a crane safely for the same one-year period. The Rule takes effect immediately.

 

The notice, which comes just one day before the certification requirement was due to come into effect, follows publication of a Proposed Rule in August in which OSHA announced its plans for the postponement.

 

OSHA believes that an additional year will be sufficient to complete work on addressing the two issues that has concerned industry ever since the crane rule was published in 2010; namely, whether operators need to be certified by type and capacity, or just by type; and whether certification is sufficient by itself to deem an operator qualified to operate a crane.

 

While OSHA is not at liberty to disclose the exact language, it will propose to fix these two issues, it has again reaffirmed its intention, first noted in its submission to the Advisory Committee on Construction Safety and Health (ACCSH) in 2015, “to propose removing the capacity component of certification.” OSHA also notes that it would be unfair to employers to enforce the certification requirement “before completing the separate rulemaking to change that criteria.”

 

On the second issue, OSHA states in this latest rulemaking that it currently is “not prepared to make a determination whether certification alone is insufficient” in determining whether an operator is qualified.

 

The National Commission for the Certification of Crane Operators (NCCCO) supported the additional delay “reluctantly” since the changes to the rule were critically important to the effectiveness of the certification requirement, said NCCCO CEO Graham Brent. However, it was important OSHA acted with urgency. “Since the positive impact of professionally developed, third-party, accredited crane operator certification on the incidence of deaths and injuries caused by crane accidents has been amply demonstrated during the more than 20 years that NCCCO has been providing it (see, for example, Cal-OSHA Study of Crane Accidents, 2008) every delay means that this nation’s workers continue to be exposed to risks that would otherwise have been mitigated,” NCCCO stated in its official submission to OSHA in September.

Final Rule delaying its deadline for crane operators to be certified can be read here
https://www.federalregister.gov/documents/2017/11/09/2017-24349/cranes-and-derricks-in-construction-operator-certification-extension

 

 

This press release was written by
The National Commission for the Certification of Crane Operators (NCCCO) was formed in 1995 as an independent, non-profit organization by industry to develop and administer a nationwide program for the certification of crane operators and related personnel. Since then, NCCCO has administered over 1,200,000 nationally accredited written and practical examinations and issued more than 425,000 nationally accredited and OSHA-compliant certifications in all 50 states. For all the latest NCCCO news, follow @NCCCOorg on Twitter.

 

You may also like
OSHA Extends Compliance Date for Electronically Submitting Injury, Illness Reports to December 15, 2017
Dust Collection & OSHA Silica
Scott A. Mugno Nominated to be Assistant Secretary of Labor, Occupational Safety and Health by President Donald J. Trump
U.S. Department of Labor and Massachusetts Packaging Company and Staffing Agencies Reach Agreements to Enhance Workplace Safeguards