Home > Articles > Webinar by ACHIH® on “The Globally Harmonized System of Classication and Labeling of Chemicals (GHS): A Comprehensive Course for Working with Safety

Webinar by ACHIH® on “The Globally Harmonized System of Classication and Labeling of Chemicals (GHS): A Comprehensive Course for Working with Safety

Comments are Off

August 15, 2018 –
ACGIH ® will present The Globally Harmonized System of Classification
and Labeling of Chemicals (GHS): A Comprehensive Course for Working With Safety Data Sheets (SDS)
webinar series beginning on October 2, 2018 and continuing on each Tuesday of October at the following times:
2:00 p.m. – 4:30 p.m. Eastern Time
1:00 p.m. – 3:30 p.m. Central Time
12:00 p.m. – 2:30 p.m. Mountain Time
11:00 a.m. – 1:30 p.m. Pacific Time

Attend as many as you’d like or attend all five and get one FREE!
This five session webinar series will provide attendees with an understanding and background of the criteria
needed to classify hazardous products. Understanding the information presented on Safety Data Sheets is essential
in responding to potentially hazardous products found in the workplace. After participating in this webinar series,
attendees will have acquired the knowledge necessary to evaluate the information presented on SDS and give
appropriate feedback to suppliers to improve the quality of information provided.
Session 1 – Introduction to GHS: Tips and Tricks for Evaluating SDS and Labels (October 2, 2018) – Safety
Data Sheets are everywhere. Having a basic comprehension of SDS and hazard communication is no longer
sufficient to understand and evaluate the hazards of chemicals. With the relatively new standards, information
appearing on SDS has changed and the knowledge required to properly translate information on the SDS to
workplace hazard control has increased.

Defining the Science of Occupational and Environmental Health ®

After successful completion of Session 1, attendees will:

  •  Be able to identify the key components of a compliant SDS
  •  Know where to find the most important information on the SDS
  •  Know how to provide appropriate feedback to suppliers
  • Know how to translate information on SDS to workplace hazard control
  • Be able to use SDS for workplace labeling
    Session 2 – GHS: Physical Hazards (October 9, 2018) – This session will review the physical hazard classes
    covered by the GHS including flammable gases, oxidizing liquids, corrosive to metals, etc. An overview of the
    data points needed for classification of physical hazards and an explanation on how to handle substances and
    mixtures will be presented. Label elements associated with each physical hazard will be reviewed.
    After successful completion of Session 2, attendees will:
  •  Understand the types of data used for each physical hazard classification
  •  Know which questions to ask a supplier to better understand hazard classifications
  •  Understand how GHS hazard classifications reflect relative hazards
  • Be able to identify label elements associated with each physical hazard

Be able to identify sources of independently available physical hazard data

Session 3 – GHS: Health Hazards (October 16, 2018) – This session will review the health hazard classes
covered by the GHS. Acute toxicity, chronic health hazards such as reproductive toxicity and carcinogenicity, and
low- and high-level health hazards will be discussed. An overview of the data points required for substance
classification and the various mixture rules for all of the GHS health hazards will be presented. This session will
also cover the nuances of health hazard classification that will allow participants to better understand the
information conveyed on the SDS.
After successful completion of Session 3, attendees will:

  •  Understand the different health hazards covered by the GHS
  • Understand the interaction between data points and classification
  • Know what data are required on the SDS to support health hazard classification
  •  Understand how health hazard classifications are reflected in labeling
  • Be able to identify sources of independently available health hazard data
  • Session 4 – GHS: Environmental Hazards (October 23, 2018) – Optional in the U.S. and Canada, most
    international regulations have adopted the GHS Environmental Hazard Classification. This session will review the
    environmental hazard classes (hazardous to aquatic environment, hazardous to the ozone layer) covered by the
    After successful completion of Session 4, attendees will:
  •  Understand the different environmental hazards covered by the GHS
  •  Know where to find environmental hazard data
  • Understand the interaction between GHS environmental hazard classification and transport
  • Understand the difference between acute and chronic environmental hazards
  • Session 5 – GHS Around the World (October 30, 2018) – Shipping to and receiving products from different
    regions of the world require knowledge of that region’s regulatory framework. Since the GHS has a building
    block approach, different countries may have implemented different hazard classes or hazard categories when
    incorporating GHS into their regulations. This session will provide an overview of where the GHS has been
    formally adopted and in what context.
    After successful completion of Session 5, attendees will:
  •  Be able to identify the many countries where the GHS has been adopted
  •  Understand the building block approach of GHS adoption
  • Understand the effect of GHS revisions on GHS adoption
  • Know the key deadlines for major country GHS adoptionTo attend the entire series and receive one webinar free, point your browser to:
    ACGIH ® is pleased to offer webinar attendees an audio option. U.S. and Canadian attendees can connect to the
    audio portion of the webinar via the toll-free audio telephone link or listen to the audio portion through an audio
    stream directly through their computer. Other international participants can listen via the audio stream without
    incurring additional telephone charges.

Chandra Deeds-Gioiello, MS, CIH, SDSRP and Denese Deeds, CIH, FAIHA will present this webinar.
Chandra Deeds-Gioiello, MS, CIH, SDSRP holds a Bachelor’s degree in anthropology from Franklin Marshal
College and a Master’s degree in Industrial Hygiene from the University of New Haven. She is Vice-President of
a small consulting firm – Industrial Health & Safety Consultants (IH&SC). Ms. Gioiello is a registered Safety
Data Sheet and Label Author and a Certified Industrial Hygienist. She specializes in international hazard
communication regulations. She regularly helps clients navigate the regulations across the globe, especially the
Asia-Pacific countries. She is active with the Society of Chemical Hazard Communication (SCHC) and the
American Industrial Hygiene Association (AIHA). She helped create the SDS and Label Author registry for
AIHA and is on the subject matter expert team. Ms. Gioiello previously served as the Chair of the SCHC Social
Media Committee and spearheaded their social media expansion. She currently serves on the ACGIH ® Board of
Directors .

Denese Deeds, CIH, FAIHA is co-founder of Industrial Health & Safety Consultants (IH&SC) where she is the
Director of Chemical Regulatory Services. In that function, she prepares MSDS, labels and other hazard
communication documents, files international chemical registrations and assists companies with overall chemical
regulatory compliance. She has 38 years in the field and is a recognized expert. Prior to founding IH&SC she
worked as an Industrial Hygienist for General Electric and Westinghouse. Ms. Deeds has a degree in Chemistry
from Stetson University. She lectured at the junior college level and has taught short courses on safety, industrial
hygiene, hazard communication including U.S. and international SDS and chemical labeling and the
transportation of hazardous materials/dangerous goods. Ms. Deeds is certified in the comprehensive practice of
industrial hygiene by ABIH. She is a fellow of AIHA and a member of the American Academy of Industrial
Hygiene (AAIH) and the Society for Chemical Hazard Communication (SCHC). Ms. Deeds serves on the
Stewardship and Sustainability Committee. She is a past president of the SCHC and serves on the Outreach and
Communication Committee for SCHC. She is a registered SDS and Label Author. She was awarded the Alice
Hamilton Award by AIHA in 2014 and the Lifetime Achievement Award by SCHC in 2016.
Each session in this webinar series contains 2.5 contact hours and may be eligible for ABIH CM credit. See the
ABIH website ( www.abih.org ) for CM credit criteria. This webinar series may also qualify for BCSP
recertification points for Certified Safety Professionals. Participants seeking confirmation of attendance for these
webinars from ACGIH ® must attend the live events or view the archive and submit the final exams and
evaluations. Certificates of Completion will be issued in a timely manner after receipt and completion of these
To register for this exciting event, visit the ACGIH ® website at https://www.acgih.org/professional-development-
events/education/elearning/ghs-labeling-of-chemicals-safety-data-sheets .
ACGIH ® is a 501(c)(3) charitable scientific organization that advances occupational and environmental health.
ACGIH ® is one of the industry’s leading publications resources, with approximately 400 titles relative to
occupational and environmental health and safety, including the renowned TLVs ® and BEIs ® . For more
information, visit the ACGIH ® website at www.acgih.org or call our Customer Service Representatives at 513-

You may also like
Defining Durability in Industrial Labels: Why the Right Label Matters
CSB Releases Arkema Accident Final Report